Two Ways to Connect Infinity Monitors to Infinik Boxes

Sometimes when using a TV box, connect it to a computer monitor. Under normal circumstances, the latest computer monitors on the market are all equipped with HDMI interfaces and can be directly connected via HDMI cable. However, there are some users who are using old-fashioned displays without HDMI interfaces. How do you connect TV boxes with computer monitors? How can these old display wastes be used as TVs? Here are two ways to connect older Infinect TV boxes to older monitors and share them.

In fact, there are two methods to connect the old-fashioned display to the Infik TV box (similar to other boxes). First, the DVI and VGA are used to introduce the two types of adapters that need to be used.

First, the need to use two adapters

1, HDMI to DVI adapter

This connector is relatively cheap, the price ranging from 10 yuan to tens of dollars, DVI is also a digital interface, but DVI can not output sound, the adapter will be connected to the monitor's DVI port, and then you can connect the HDMI and the box.

2, HDMI to VGA adapter

This adapter is slightly more expensive, the market price is more than tens of yuan, VGA is a common analog output, without audio, the HDMI connector of the adapter is inserted into the HDMI port of the Infik TV box, converted to VGA, and then Use a VGA cable to connect the monitor.

The specific method is as follows:

Second, two methods of connecting Infinect TV box to computer monitor

1, use HDMI to DVI connection

Preparation: HDMI to DVI connector, passive speaker

1) Infinik box USB interface powers the speaker, AV port connects the speaker output sound, and HDMI interface connects the monitor output image.

2) Connect the HDMI to DVI connector on the monitor. The display mode should not be adjusted too high. Otherwise, the monitor may not display, and it is adjusted to PAL or 720p.

HDMI to VGA adapter to connect a computer monitor

2, use HDMI to VGA connection

Preparation: HDMI to VGA adapter, passive speaker
1) Plug the VGA VGA cable HDMI into the HDMI port of the Infinik box. Connect the VGA cable connected to the computer to the VGA port of the patch cord.
2) Insert the USB of the passive speaker into the USB port of the Infinik box to power the passive speaker.
3), insert the power, boot, easy to get.

HDMI to VGA connection to a computer monitor

After the completion of the trial, the sound and video are very good. However, the screen needs to be adjusted, and each monitor's key adjustment is performed by itself. In the Infik TV box, you can set up - display - image adjustment inside the lower left corner to move up and down to adjust. With the help of the Infik TV box, the old-fashioned display is now basically a good TV set.

to sum up:

DVI is also known as an HD interface, which is compatible with HDMI signals, but there is no integrated audio signal. Therefore, using the HDMI to DVI adapter to connect the monitor is significantly better. So it is recommended to use HDMI to DVI connector if you pick up the old monitor.