introduction
As a combination of high-tech and new technology, intelligent robot directly reflects the development level of a country's information technology and has been highly valued by all sectors of society. Intelligent robots involve almost all aspects of information technology, allowing students to access and see the panoramic view of information technology, and intelligent robots are an open platform for information technology, students can fully use their imagination to develop a variety of smart devices, thus cultivating students The ability to develop information technology, in the development process, to develop a variety of abilities to stimulate students' interest.
The TMS320LF2407A educational robot hardware platform based on smart car is designed in this paper, including the power module and motor drive module circuit design, and integrates infrared and photosensitive sensors and wireless data transmission module. Through software design, tracking and obstacle avoidance can be realized. The combination of tracing and obstacle avoidance has achieved the goal of combining theoretical study with hands-on practice, consolidating knowledge and further enhancing the interest of learners.
1 Design ideas and overall plan
1.1 The design idea of ​​educational robot
The educational robot uses the TMS320LF2407A microcontroller as the core. The external environment information collected by various sensors such as infrared sensor and photoelectric sensor is used as the input signal. The DSP performs arithmetic processing and uses PWM technology to output and adjust the speed and direction of the car in real time to realize the car. Automatic control functions such as tracing, obstacle avoidance, tracing, and obstacle avoidance, and the car has been traced
When encountering obstacles in the process, when the tracking and obstacle avoidance algorithm can not complete the obstacle avoidance function while tracing, the wireless communication transceiver module connected to the PC and another wireless transceiver module connected to the DSP can realize wireless short-distance communication. , control the car out of the obstacle zone and carry out normal tracing.
1.2 Overall design and block diagram
The overall block diagram of the robot car system is shown in Figure 1. It mainly consists of the TMS320LF2407A minimum system part, power supply module, motor drive module, sensor module and wireless communication module, which realizes the continuous transmission of information from various sensors on the vehicle to the on-board microcontroller. And download the programming design algorithm to the microcontroller to real-time adjust the motion state of the car to complete certain functional requirements.

2 system hardware module design
2.1 TMS320LF2407A minimum system design
The TMS320LF2407A is the most widely used product in the 2000 series. It not only has an efficient processor for digital signal processing, but also integrates a rich set of on-chip peripherals for memory and adaptive control applications, thus forming a basic On-chip computer system. In addition to the improved Harvard architecture, multi-bus architecture and pipeline structure, it also uses high-performance static CMOS technology, the voltage drop is 3.3V, reducing power consumption, instruction execution speed is increased to 40MIPS, almost all instructions can be 2 5ns is completed in a single cycle. The basic structure of the TMS320LF2407A consists of three components: a central processing unit (CPU), memory, on-chip peripherals, and dedicated hardware circuitry. The hardware platform of the system makes full use of the characteristics of the TMS320LF2407A controller to adopt modular design, which is divided into basic circuit and extended control circuit. The basic circuit includes a power supply circuit, a reset circuit, a clock circuit, an A/D input channel, and a JTAG emulation circuit. The expansion circuit includes a memory and a decoding circuit, a serial communication SCI and RS-232 interface circuit, a CAN interface circuit, an SPI function module, and the like. The system hardware block diagram is shown in Figure 2.

ZGAR TWISTER Disposable
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
Our products include disposable e-cigarettes, rechargeable e-cigarettes, rechargreable disposable vape pen, and various of flavors of cigarette cartridges. From 600puffs to 5000puffs, ZGAR bar Disposable offer high-tech R&D, E-cigarette improves battery capacity, We offer various of flavors and support customization. And printing designs can be customized. We have our own professional team and competitive quotations for any OEM or ODM works.
We supply OEM rechargeable disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.
ZGAR TWISTER Vape,ZGAR TWISTER Vape disposable electronic cigarette,ZGAR TWISTER Vape pen atomizer ,ZGAR TWISTER Vape E-cig,TWISTER Vape disposable electronic cigarette
Zgar International (M) SDN BHD , https://www.oemvape-pen.com