LED lights can be made up of simple kits, or they can be combined by optical systems, thermal systems, electrical systems and mechanical systems. The simple patchwork is nothing more than a luminous product, and the complex and perfect design is a practical artwork, which is the enjoyment of beauty and the enjoyment of light.
first step
Prepare materials: housing kit, power supply, light panel, several wires and tools.
Figure 1: Three-piece power supply, lampshade, lamp body, base
Figure 2: Resistor-capacitor buck power supply and LED light board
Second step
Install the power supply inside the lamp body and pull the power cable out.
Figure 3: Installing the power supply in the lamp body
third step
The LED light board is installed in the lamp body, and the power wire is welded, and the glue plate is attached under the light board to make the light board stick to the lamp body (the wire is fixed by the wire).
Figure 4: Mounting the LED panel in the lamp body
the fourth step
Install the lamp holder and tighten
Figure 5: Mounting the base
the fifth step
Install the lamp cover and fix it with glue.
Figure 6: Mounting the lampshade
Step 6
Ready to power
Figure 7: Ready to power up
There were once too many educational institutions who couldn`t adopt Digital Signage because digital siganage for schools was too difficult and too expensive.
JMSX designed to change that with cloud-based easy install software that works on any consumer device and an educational discount for all screens, forever.
ScreenCloud,digital signage platform,digital signage cloud platform,Campus Information Management Platform
Jumei Video(Shenzhen)Co.,Ltd , https://www.jmsxdisplay.com