Model NO.: XT1580SELD100-J
Illumination Time: 12h
Cell Type: Lion-Battery
Charging Time (H): 6
Usage: Garden, Street, Park/ School
IP Rating: IP65
Certification: CE, RoHS
Voltage: 12/24V
With Light Source: With Light Source
Solar Panel: Monocrystalline Silicon 36V/120W
Battery: Grade a Lithium Ion Battery 25ah/24V
Contrtol Mode: Light Control+Time Control
Working Time Under Full Power: 12h
Working Time Under Half Power: 36h
Beam Angle: C0~180 140°/ T90~270 80°
Trademark: Suntisolar
Transport Package: by Carton and Pallet
Specification: 1, 580*545*61
Origin: China
HS Code: 940540900
Model NO.: XT1580SELD100-J
Illumination Time: 12h
Cell Type: Lion-Battery
Charging Time (H): 6
Usage: Garden, Street, Park/ School
IP Rating: IP65
Certification: CE, RoHS
Voltage: 12/24V
With Light Source: With Light Source
Solar Panel: Monocrystalline Silicon 36V/120W
Battery: Grade a Lithium Ion Battery 25ah/24V
Contrtol Mode: Light Control+Time Control
Working Time Under Full Power: 12h
Working Time Under Half Power: 36h
Beam Angle: C0~180 140°/ T90~270 80°
Trademark: Suntisolar
Transport Package: by Carton and Pallet
Specification: 1, 580*545*61
Origin: China
HS Code: 940540900
Smart Outdoor LED Light 100W Integrated Solar Street Light
Product Advantage:
1.Imported highly efficient LED Chip with luminous efficiency 170-180lm/w works with long life. LED Module angle is adjustable -15°~+15° with low dazzle, IP67. The adjustable angle guarantees best illumination effect
2.Highly efficient monocrystalline silicon solar panel with imported silicon wafer is adopted, 18% exchange rate and over 20 years working life.
3.The charging and discharging efficiency of controller with built-in replaceable constant current module is up to 98%. Light on-off is automatic by light control, time control and internet control is also available. Protection Level is IP67.
4.Static free spraying is adopted on surface treatment, which is better on adhesive force, corrosion resistance and aging resistant than painting. The spraying technology guarantees surface of products stable more than 10 years.
5.Battery module is replaceable, built-in automobile power lithium ion battery module is connected in series and multiple circuit by several consistent Grade A lithium battery cells. Over charging and discharging is protected by circuit board, plus protection box with IP65 level, the working life of battery is over 8 years.
6.Installing base angle is adjustable from 0 to 90 degrees. It uses Japanese ADC12 aluminum, also known as No.12 Aluminum, Al-Si-Cu series aluminum alloy, which is a kind of pressure die casting aluminum alloy, oxidative resistant even exposed to air long term, good performance of corrosion and impact resistance, it is the ideal load bearing part for luminaries.
Â
Product Detailes:
  | 1.3 Technical Parameters | |
| Model: | XT1580SELD100-J |
| LED Â Quantity: | 144Â PCS 3255 |
| Module Quantity (pcs): | 3 |
| Power: | 100W |
| Solar Panel: | Monocrystalline Silicon 36V/120W |
| Battery: | Grade A Lithium Ion Battery 25Ah/24V |
| Adjustable Angle of Module(±15°): | Yes |
| Contrtol Mode: |
Light Control+Time Control  |
| Working time under full power: | 12h |
| Working time under half power: | 36h |
| Charging time(1000W/m2) | 6h |
| On-off threshold level: | on<=8LUX,OFF>=10LUX |
| Secondary lighting distribution: | PC |
| Beam Angle: |
C0~180 140°/ T90~270 80°  |
| Protection Grade: | IP65 |
| Photoelectric Parameter: | |
| Color Temperature(K): | 3000-6500K |
| CRI(Ra): | 70 |
| Lumens(lm): | 10,000-11,000lm |
| Intelligent Mode: | Yes |
| Working under rainy days: | 365 Days |
| Package Dimension: | |
| Net Weight((kg): | 27.3kg |
| Gross Weight (kg): |
56.6kg (2pcs/box) Â |
| Product Dimension (mm): | 1,580×545×61mm±5% |
| Package Dimension(mm): | 1,620×220×600mm±5% |
| Quantity in 40 Feet Container: | 540PCS (No Pallet) |
| Environment Temperature: | |
| Discharging Temperature (ºC): | -20~80 |
| Charging Temperature (ºC): | -20~80 |
| Storage Temperature (ºC): | 0~45 |
| Installing Parameter: | |
| Diameter of Pole: | Ø80mm |
| Screw Fixation: | Yes |
| Wind resistance level(km/h): | 209 |
| Installation Height (m): | 9-10 |
| Installation Distance(m): | 36-40 |
| Irradiation Area(m2): | 400Â Â Â |
Product Advantage:
1.Imported highly efficient LED Chip with luminous efficiency 170-180lm/w works with long life. LED Module angle is adjustable -15°~+15° with low dazzle, IP67. The adjustable angle guarantees best illumination effect
2.Highly efficient monocrystalline silicon solar panel with imported silicon wafer is adopted, 18% exchange rate and over 20 years working life.
3.The charging and discharging efficiency of controller with built-in replaceable constant current module is up to 98%. Light on-off is automatic by light control, time control and internet control is also available. Protection Level is IP67.
4.Static free spraying is adopted on surface treatment, which is better on adhesive force, corrosion resistance and aging resistant than painting. The spraying technology guarantees surface of products stable more than 10 years.
5.Battery module is replaceable, built-in automobile power lithium ion battery module is connected in series and multiple circuit by several consistent Grade A lithium battery cells. Over charging and discharging is protected by circuit board, plus protection box with IP65 level, the working life of battery is over 8 years.
6.Installing base angle is adjustable from 0 to 90 degrees. It uses Japanese ADC12 aluminum, also known as No.12 Aluminum, Al-Si-Cu series aluminum alloy, which is a kind of pressure die casting aluminum alloy, oxidative resistant even exposed to air long term, good performance of corrosion and impact resistance, it is the ideal load bearing part for luminaries.
FAQ:
Q1:How to make a reasonable solar street light design?
Q1:How to make a reasonable solar street light design?
- What's your wanted LED POWER ?(We can do the LED From 9W to 120W single or double design)
- What's the Height of the Pole ?
- How about the Lighting time ,11-12hrs/day will be ok ?
If you have above idea,pls let us know,we will offer you based on local solar and weather condition.
Q2: Sample is available?
Yes, we welcome sample order to test and check quality firstly.,and we will return your sample cost in your formal order.
Â
Q3: How do you ship the goods and how long does it take to arrive?
Airline and sea shipping also optional. Shipping time depends on distance.
Q4: Is it OK to print my logo on led light product?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Â
Q5: Do you offer guarantee for the products?
Yes, we offer 3-5 years warranty to our products,and we will do "Warranty Statement" for you after confirmed the order .
Â
Q6: How to deal with the faulty?
1), Our products are produced in strict quality control system,but in case any damage in shiping,we will provide you more free 1% as spare parts.
2), during the guarantee period, we will provide maintance free and replacement service.
Â
Q2: Sample is available?
Yes, we welcome sample order to test and check quality firstly.,and we will return your sample cost in your formal order.
Â
Q3: How do you ship the goods and how long does it take to arrive?
Airline and sea shipping also optional. Shipping time depends on distance.
Q4: Is it OK to print my logo on led light product?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Â
Q5: Do you offer guarantee for the products?
Yes, we offer 3-5 years warranty to our products,and we will do "Warranty Statement" for you after confirmed the order .
Â
Q6: How to deal with the faulty?
1), Our products are produced in strict quality control system,but in case any damage in shiping,we will provide you more free 1% as spare parts.
2), during the guarantee period, we will provide maintance free and replacement service.
Â
Â
Smart Outdoor LED Light 100W Integrated Solar Street Light
Product Advantage:
1.Imported highly efficient LED Chip with luminous efficiency 170-180lm/w works with long life. LED Module angle is adjustable -15°~+15° with low dazzle, IP67. The adjustable angle guarantees best illumination effect
2.Highly efficient monocrystalline silicon solar panel with imported silicon wafer is adopted, 18% exchange rate and over 20 years working life.
3.The charging and discharging efficiency of controller with built-in replaceable constant current module is up to 98%. Light on-off is automatic by light control, time control and internet control is also available. Protection Level is IP67.
4.Static free spraying is adopted on surface treatment, which is better on adhesive force, corrosion resistance and aging resistant than painting. The spraying technology guarantees surface of products stable more than 10 years.
5.Battery module is replaceable, built-in automobile power lithium ion battery module is connected in series and multiple circuit by several consistent Grade A lithium battery cells. Over charging and discharging is protected by circuit board, plus protection box with IP65 level, the working life of battery is over 8 years.
6.Installing base angle is adjustable from 0 to 90 degrees. It uses Japanese ADC12 aluminum, also known as No.12 Aluminum, Al-Si-Cu series aluminum alloy, which is a kind of pressure die casting aluminum alloy, oxidative resistant even exposed to air long term, good performance of corrosion and impact resistance, it is the ideal load bearing part for luminaries.
Product Detailes:
  | 1.3 Technical Parameters | |
| Model: | XT1580SELD100-J |
| LED Â Quantity: | 144Â PCS 3255 |
| Module Quantity (pcs): | 3 |
| Power: | 100W |
| Solar Panel: | Monocrystalline Silicon 36V/120W |
| Battery: | Grade A Lithium Ion Battery 25Ah/24V |
| Adjustable Angle of Module(±15°): | Yes |
| Contrtol Mode: |
Light Control+Time Control  |
| Working time under full power: | 12h |
| Working time under half power: | 36h |
| Charging time(1000W/m2) | 6h |
| On-off threshold level: | on<=8LUX,OFF>=10LUX |
| Secondary lighting distribution: | PC |
| Beam Angle: |
C0~180 140°/ T90~270 80°  |
| Protection Grade: | IP65 |
| Photoelectric Parameter: | |
| Color Temperature(K): | 3000-6500K |
| CRI(Ra): | 70 |
| Lumens(lm): | 10,000-11,000lm |
| Intelligent Mode: | Yes |
| Working under rainy days: | 365 Days |
| Package Dimension: | |
| Net Weight((kg): | 27.3kg |
| Gross Weight (kg): |
56.6kg (2pcs/box) Â |
| Product Dimension (mm): | 1,580×545×61mm±5% |
| Package Dimension(mm): | 1,620×220×600mm±5% |
| Quantity in 40 Feet Container: | 540PCS (No Pallet) |
| Environment Temperature: | |
| Discharging Temperature (ºC): | -20~80 |
| Charging Temperature (ºC): | -20~80 |
| Storage Temperature (ºC): | 0~45 |
| Installing Parameter: | |
| Diameter of Pole: | Ø80mm |
| Screw Fixation: | Yes |
| Wind resistance level(km/h): | 209 |
| Installation Height (m): | 9-10 |
| Installation Distance(m): | 36-40 |
| Irradiation Area(m2): | 400Â Â Â |
Product Advantage:
1.Imported highly efficient LED Chip with luminous efficiency 170-180lm/w works with long life. LED Module angle is adjustable -15°~+15° with low dazzle, IP67. The adjustable angle guarantees best illumination effect
2.Highly efficient monocrystalline silicon solar panel with imported silicon wafer is adopted, 18% exchange rate and over 20 years working life.
3.The charging and discharging efficiency of controller with built-in replaceable constant current module is up to 98%. Light on-off is automatic by light control, time control and internet control is also available. Protection Level is IP67.
4.Static free spraying is adopted on surface treatment, which is better on adhesive force, corrosion resistance and aging resistant than painting. The spraying technology guarantees surface of products stable more than 10 years.
5.Battery module is replaceable, built-in automobile power lithium ion battery module is connected in series and multiple circuit by several consistent Grade A lithium battery cells. Over charging and discharging is protected by circuit board, plus protection box with IP65 level, the working life of battery is over 8 years.
6.Installing base angle is adjustable from 0 to 90 degrees. It uses Japanese ADC12 aluminum, also known as No.12 Aluminum, Al-Si-Cu series aluminum alloy, which is a kind of pressure die casting aluminum alloy, oxidative resistant even exposed to air long term, good performance of corrosion and impact resistance, it is the ideal load bearing part for luminaries.
FAQ:
Q1:How to make a reasonable solar street light design?
Q1:How to make a reasonable solar street light design?
- What's your wanted LED POWER ?(We can do the LED From 9W to 120W single or double design)
- What's the Height of the Pole ?
- How about the Lighting time ,11-12hrs/day will be ok ?
If you have above idea,pls let us know,we will offer you based on local solar and weather condition.
Depends on different parameters, high frequency signals are reflected on PCB design usually means the impedance varies with respect to the sending component. To prevent such capacitive effects and make sure all parameters exactly specified, special materials and high level process control are required
High frequency PCB features:
Dielectric constant ( DK ε,Er)value need to be small and stable, high DK may cause signal transmission delay.
Dissipation factor (DF, tgδ) value need to be small, as it will affect quality of signal transmission, smaller DF could make sure smaller signal wastage.
The thermal expansivity need to be the same with copper foil as possible. If they are different may cause copper foil separated when the changes of cold and heat happen.
Heat resisting property, impact endurance, chemistry resisting, peel off resisting need to be good.
Water absorptivity need to be low, high water absorptivity will affect DK & DF when in the wet environment.
Depends on different parameters, high frequency signals are reflected on PCB design usually means the impedance varies with respect to the sending component. To prevent such capacitive effects and make sure all parameters exactly specified, special materials and high level process control are required
High frequency PCB features:
Dielectric constant ( DK ε,Er)value need to be small and stable, high DK may cause signal transmission delay.
Dissipation factor (DF, tgδ) value need to be small, as it will affect quality of signal transmission, smaller DF could make sure smaller signal wastage.
The thermal expansivity need to be the same with copper foil as possible. If they are different may cause copper foil separated when the changes of cold and heat happen.
Heat resisting property, impact endurance, chemistry resisting, peel off resisting need to be good.
Water absorptivity need to be low, high water absorptivity will affect DK & DF when in the wet environment.
Topscom support production of various high-frequency PCB from prototypes to production run in order to meet increasing demands of high-frequency PCB ,microwave PCB & RF PCB of our customers, include many of good performance high frequency PCB ,such as Rogers PCB, Ceramic PCB, Teflon PCB, Taconic PCB, Arlon PCB.
| Material | Dielectric Constant |
| RO4350B | 3.48±0.05@10 GHz |
| RO4003C | 3.38±@10 GHz |
| Ro3003 | 3.00±0.04@10 GHz |
| Ro3010 | 10.2±0.03@10 GHz |
| RT5880 | 2.20±0.02@10 GHz |
Check our capabilities by viewing the table found below:
| Feature | Capability |
| Quality Grade | Standard IPC 2 |
| Number of Layers | 2 - 24layers |
| Order Quantity | 1pc - 10000+pcs |
| Build Time | 2days - 5weeks |
| Material | RO4003C, RO4350B, Ro3003, Ro3010, RT5880 |
| PP | Rogers 4450F, Domestic-(25FR), Domestic-(RF-27), Domestic-(6700) |
| Board Size | Min 6mm x 6mm | Max 457mm x 610mm |
| Board Thickness | 0.4mm - 5.0mm |
| Copper Weight(Finished) | 0.5oz - 2.oz |
| Min Tracing/Spacing | 3mil/3mil |
| Solder Mask Sides | As per the file |
| Solder Mask Color | Green, White, Blue, Black, Red, Yellow |
| Silkscreen Sides | As per the file |
| Silkscreen Color | White, Black, Yellow |
| Surface Finish |
Electroless nickel/immersion gold (ENIG) - RoHS Immersion silver - RoHS Immersion tin - RoHS Organic solderability preservatives - RoHS |
| Min Annular Ring | 4mil |
| Min Drilling Hole Diameter | 6mil |
| Impedance tolerance | ±10% |
| Other Techniques |
Peelable solder mask Gold fingers Carbon oil Countersink holes |
Discuss your High Frequency PCB Project Today
High Frequency Pcb,High Frequency Circuit Boards,Prototype High Frequency Pcb,Special Customized High Frequency Pcb
Topscom Technology Co., Ltd. , http://www.pcbassemblycn.com