The precautions for the pressure sensor during use are not only a problem that pressure sensor manufacturers should pay attention to, but also what must be understood by those of us in the automation industry, which have important significance and far-reaching impact on our actual operation and cost control The details determine the cost, everything must start with the details, and the details determine the success or failure. Below we share the precautions during the use of this pressure sensor.
Let's talk briefly about the main points in the process of using the pressure sensor, the correct installation position of the transmitter on the process pipeline and the measured medium. We will achieve good results by implementing the following methods.
First, prevent the transmitter from contacting with corrosive or overheated media to prevent slag from depositing in the conduit; second, when measuring the liquid pressure, the pressure port should be opened on the side of the process pipe to avoid precipitation and slag; The pressure port should be opened at the top of the process pipeline, and the transmitter should also be installed at the top of the process pipeline so that the accumulated liquid can be easily injected into the process pipeline.
Third, the pressure guiding tube should be installed in a place with small temperature fluctuations; when measuring steam or other high-temperature media, a condenser such as a buffer tube (coil) should be connected, and the working temperature of the transmitter should not exceed the limit.
Then, when freezing occurs in winter, the transmitter installed outdoors must take anti-freezing measures to prevent the liquid in the pressure port from expanding due to icing volume and causing damage to the sensor.
Then, when measuring the liquid pressure, the installation position of the transmitter should avoid the impact of the liquid (water hammer phenomenon), so as to prevent the sensor from being damaged by overpressure.
Finally, when wiring, pass the cable through the waterproof connector (accessory) or the flexible tube and tighten the sealing nut to prevent rain water etc. from leaking into the transmitter housing through the cable.
This series is a professional advertising LED Screen for classic indoor use. Small in size, it is convenient to be placed in shops, cafes, clothing stores, restaurants and many other places. Easy to operate. Wifi connect and controlled by mobile App, USB to play video or display pictures. Cabinet with wheels, easy moveable. Regular size around 640*1920mm in Poster LED Display, it will be a very good choice for advertising screen for all shops. It can be customized to ourdoot types or different sizes.
Waterproof Led Display Screen Wall,Led Display Advertising,Led Display Advertising Billboards,Full Color Led Display
Guangzhou Cheng Wen Photoelectric Technology Co., Ltd. , https://www.leddisplaycw.com