Step-up power supply design circuit diagram

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
MOS power IC full range
TP-IP4220CZ6 5V 0.35PF breakdown voltage 6V SOT
Shunuo varistor / ESD varistor / product complete / Sunlord first-class agent

description:

The same single-string design, the boost structure (Figure 4) will be less efficient than the buck structure, but the number of LEDs connected in series is no longer limited by the withstand voltage of the IC, but is determined by MOS, so it can be connected in series. LED. Since most solar cells have low output voltages, solar street lights are more suitable for use in boosting structures. The constant current design of the current mode allows the output current to be less affected by the input voltage change, and the street lamp can maintain the same brightness when the battery is fully loaded and when there is no power.

The advantage of this scheme is that the number of LEDs in series is not limited by the IC withstand voltage. The disadvantage is that the circuit cost is higher and the efficiency is slightly lower than that of the step-down structure.

Small Machine Room Passenger Elevator

Circular Elevator,Machine Roomless Elevator,Small Machine Room Elevator,Small Machine Room Passenger Elevator

XI'AN TYPICAL ELEVATOR CO., LTD , https://www.chinaxiantypical.com