If you want lower energy bills AND better lights, you need to upgrade to LEDs of course. Payback is a simple calculation that determines, based on the savings, how long it will take you to recoup your investment.
LEDs, though an initial investment, have an extremely low payback period, which means you make your money back in no time.
About the spacing. Another problem that most people have to face is how many lights should be installed on a pole.One of the questions that people ask when installing LED lights is related to spacing. Spacing depends on how high up you go. The higher up you go, the bigger the fixture you can use and the farther spaced out you will be. Be careful because going higher can leave a lot of light up high and you can run into code issues, wind problems etc.
Depending on your project, Hyperlite can provide you with the best option for mounting  your project. The SFM stands for Slip Fitter Mount. This mounting unit is for round 2.5†light poles. Due to the M12 knuckle bolt you can adjust the aim 0 to 60°both upward and downward (90° to 180°) aiming in 15° increments positions. Best option for sidewalk and street lighting application.
APM stands for adjustable pole mount (suitable for square and round pole). Also called horizontal straight arm mount, it is usually used for sidewalk and street lighting application, but it can be mostly attached to other different surfaces. So, this is the option for you if any of the others are not the correct for your needs.
TM stand s for Trunnion mount. This Trunnion accessory comes with M6 screws to Loosen and to adjust the fixture to the right angle, and the maximum is 60°. The best option for you in case you decide to mount the parking lot light in your garage wall or entrance. The M12 bolts use for the installation provide secure and solid installation of the Trunnion mount in any location. Most of our customers use it for garage and home entrance and some other application are outside security lighting and even night sport illumination.
We want to offer you the best LED lights for all kinds of projects. With our low Price, great warranty and experience we provide you with top rated lights.
Description of Expandable Braided Sleeving For Cable Harness
1. Flame-retardant and halogen-free.
2.Can be cut with a common scissors without obvisous fray.
3.Softer and easier to be use on the outdoor fielad .
4. It offers durable abrasion resistance in a wide range of industrial applications.
5. The open weave construction allows an easy installation on a bundle of hoses
and cables, even if some with bulky or large connectors.
6. Totally expanded the sleeving can reach at least one point five times than the initial dimension.
7. Suitable for constructing and protecting cable harnesses or tidying cable looms.
8. Sleeve expands to allow the cables to pass through and then automatically shrinks back.
Application of Clean Cut Expandable Braided Sleeving For Cable Harness
1. Automobile wires protection
2. Structured cabling system
3.A/V cables & HDMI cables
4.Industrial hoses & tubes protection
Durability For Cable Sleeve,Specal Cable Sleeve,Grey Braided Cable Sleeve ,Wire Harness Protection Tube
Shenzhen Huiyunhai Tech.Co.,Ltd , https://www.hyhbraidedsleeve.com