Two Ways to Disable Software Booting from Millet Boxes

How to avoid software startup since the use of millet box? With the increase in the use of millet boxes, video, games, and application software are installed more and more, and many of the software will start by default, resulting in more and more cards in the millet box, and also directly affect the use of video game software running card pause. So, it is very important to avoid software booting. Here are a few ways to avoid the millet box software from booting.


First, the software setting is turned off since the start


Many software options have options for booting from software startup. We can turn it off so that the software won't boot.


Take the TV cat video as an example, start the TV cat and enter [Settings] - General Settings.


Find [boot automatically start], close it on it, the operation is very simple.


If there are elderly elders in the family, you can set the live broadcast software to start from the start, so that you can turn on the TV and you can directly enter the watch. It is also forbidden to start one by one manually since the boot is prohibited. Some software cannot be set directly. Therefore, the following method is required to disable the booting of the software.


Second, ROOT millet box


Many softwares that do not have a boot-up function, the millet box needs ROOT to achieve this function.


Millet box root need to install root tools, for example, Baidu a key root, etc., and then according to the operating procedure root millet box (take some time), root can be successfully managed to inhibit the software boot from Kai, and at the same time, some millet box system comes with The software can also be uninstalled and the large files occupying the space are cleared in time to ensure smooth operation of the millet box.

Wired Headset

This Headset including many design headset for PS4 Controller with Mic ,also with good price !You can see more information in below specification and pictures

Blue headset: Speaker: 40mm drive unit
Frequency response: 20-20KHz
Plug diameter :3.5mm
Cable length:1.2m
Type:headset
PVC 2.0/4C(8*0.08)cable L=140CM
weight:146g/216g
Sensitivity: 115dB
Impedance: 28 ohms
Colour: Black

Red one headset: cable material:2.5/4C PVC enameled wire
cable length:1200±30mm
material:ABS +PP
Plug:3.5 four-pole vinyl 4.5 gold-plated plug stereo
Wire box function: audio controller can adjust the volume, microphone switch function
Speaker specification:40MM
Speaker Resistance:28Ω
Speaker frequency range:20Hz-20KHz
Microphone specification:6*5MM
Microphone sensitivity:-52dB
Microphone frequency response:20Hz-20KHz
weight:227g 300g with box

PS4 wired headset , wired headphone, wired gaming headset, Gaming headphone headset,PS4 headset headphone ,PS4 Gaming Headset with Mic

Shenzhen GEME electronics Co,.Ltd , https://www.gemeelectparts.com