Recently, Nokia announced that the acquisition of wearable device maker Withings for $190 million has gone away, which has once again pushed the long-sleeved wearable device into the spotlight.
The addition of Nokia seems to have intensified competition, but it is precisely because of this capital injection into the wearable device industry has added a little vitality, but also to the shake-stable and adhere to the enterprise to give a shot. According to a recent industry report released by CIC, the average annual growth of wearables in the wearables market will reach 35% in the next five years. The smart watch and smart bracelets still have a large market upside.
But the industry can't be too optimistic, because the reality is still cruel, the technical challenges of wearable devices have not been broken for a long time, and the poor user experience has caused the user experience to be extremely unfriendly.
Can that continue to optimize the design?
As we all know, the endurance is mainly determined by two factors, namely battery capacity and power consumption. The higher the battery capacity, the better, and the power consumption needs to be minimized. Unfortunately, before new battery technologies or materials emerge, there is very little room for battery capacity to increase, so the pressure is almost on how to reduce power consumption.
For developers, the correct posture for low-power designs is:
First, select low-power devices (including modules and master chips);
Then, optimize the software algorithm;
Finally, the power consumption test is also the key.
Unlike most consumer electronics, wearable devices have tighter control over the power consumption of a single component and system. Nearly all internal hardware structures are accurately measured before the product leaves the factory, such as chips, sensors, displays, Wireless modules, etc., so developers can design a set of low-power systems and test equipment are inextricably linked.
At present, the mainstream testing companies in the industry include Keysight, Tektronix, Keithley and Rhodes and Schwartz. These brands are representative of the high-end market, while domestic domestic measuring instruments are mostly positioned at the low end, and the products are also oriented. SME. But wearables are just a segment of the test and measurement industry, and there aren't many low-power test solutions that companies can use directly.
So how do you choose a wearable device company?
It is not difficult to understand that the two factors of performance and price are the universal reference standard. Tuman Technology CEO Wang Wei told Lei Feng that equipment such as Agilent (Keysight) and Tektronix are more expensive than domestic brands because of their high precision. It is understood that these devices generally cost between tens of thousands and one million, while domestic products are much cheaper.
However, if the performance is more complicated, the sampling rate of the device (because the device sleeps to the running state for a very short time, it needs to capture the instantaneously changing current waveform), precision, bandwidth and storage depth, etc. Dazzling, so purchasing a suitable equipment has long been a technical activity. The following are the mainstream test equipment manufacturers and related test equipments compiled by Lei Feng. They are for your reference only!
Keysight
When it comes to Keysight, you have to make Amway a legendary company.
As a benchmark in the testing industry, Agilent was the first manufacturer to test and measure instruments from Hewlett-Packard in March 1999. In November of the same year, it was listed as an independent company on the New York Stock Exchange. However, its test and measurement program dates back to 1939, and the founder is Bill. Bill Hewlett and David. David Packard is the legend of two Silicon Valley.
But everyone may not be so familiar with Keysight. In fact, Keysight is a subsidiary of Agilent that was split in 2013 and is fully responsible for the electronic measurement business. Agilent is the parent company and its business direction is in the field of biochemistry.
Before the split, Agilent was called the "king of global electronic measurement" by the industry, and the title after the split was also logically transferred to Keysight. As the company of Agilent's electronic measurement division, it has been the world's number one position in the mid- to high-end oscilloscope market.
At present, the company has three high, medium and low product lines in the oscilloscope product line. Among them, the high-end and mid-end have introduced Keysight's unique indium phosphide semiconductor process, which is different from the brands used by Tektronix and other brands. Silicon technology, in terms of technology, we can divide test brands into two categories, one is Keysight and the other is called other companies. What is the difference between the two processes?
Taking the Infiniium V series oscilloscope as an example, because of the indium phosphide process, it has the characteristics of good impulse response, large operating voltage, good signal-to-noise ratio and high dynamic range. Therefore, other products can be spiked in measurement accuracy. In addition, the parameters of this series of equipment are leading level, the maximum storage depth is 2Gpts, the sampling rate is 80GSa/s, the bandwidth ranges from 8GHz to 33GHz, and the corresponding price is between 110,000 US dollars and 360,000 US dollars.
Of course, on low-end test equipment, Keysight has not adopted a more advanced indium phosphide process, such as the InfiniiVision 2000 X series.
In terms of power consumption testing, Keysight's N6705B DC power analyzer integrates the power supply with a digital multimeter, oscilloscope, arbitrary waveform generator and Data logger. The test current accuracy is up to the nanoamp level, and the oscilloscope bandwidth is 200 KHz. At 512 Kpts, the performance is average, but the main requirement is the accuracy and speed requirements of the wearable device test, which is priced at $8,240. The specific specifications are as follows:
The 4-slot mainframe can be installed with up to 4 modules for a total power of up to 600 W. More than 20 DC power modules are available (requires separate modules)
Voltmeter accuracy: 0.025% + 50 μV, up to 18 bits
Ammeter accuracy: 0.025% + 8 nA, up to 18 digits
Arbitrary waveform generator function: bandwidth up to 100 kHz, output power up to 300 W
Oscilloscope function: digitizes voltage and current, 200 kHz, 512 kpts, up to 18 bits
Data Logger function: measurement interval from 20 μs to 60 s, each data logger stores up to 500 million readings
4 GB non-volatile data storage for storing data records, oscilloscope traces, instrument settings
To sum up, Keysight's products are relatively complex, and the performance is also a ride, but the price of equipment is generally high.
Hotel Door Lock Motor also known as Smart Hotel Door Lock Motor, perform operations in the hotel door lock, at this point, the cardholder simply throw the door handle to open the door. That is to say the hotel door lock motor is used to open the door.
Induction door lock is a infrared sensor through induction of new security equipment, widely used in hotels, hotels and clubs, and other areas of the smart IC card, rf door lock, generally divided into induction induction door lock system, provides the high quality for the hotel induction door lock system. Induction in the European and American countries have been developed to a certain extent, has been a measure of the quality of life index of height and life.
Operating temperature range:
Hotel door lock motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Smart Hotel Door Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
lock motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Smart Hotel Door Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
Hotel door lock motor applicable door types: building doors, fire doors, security doors, door and office door, fire doors, etc. Applicable scenario: family, company, office buildings, schools, shopping malls, such as Banks.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Hotel Door Lock Motor,Smart Hotel Door Lock Motor,Hotel Keyless Door Lock Motor,Fingerprint Hotel Door Lock Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com