July flow season arrives carefully home appliances "heat stroke"

The arrival of the summer heat in July. Not only are we afraid of heat, but household appliances at home may also have “heat stroke”. It is very important to do good “heatstroke prevention” work for home appliances in the summer.

[attach]256519[/attach]

Is it OK to have your home appliances again in the hot flash season in July?

The first is the sun protection work of TV.

When the TV is running, it will generate heat. Long-term operation will cause the TV to overheat. When the TV is in a hot state for a long time, it can easily damage the components of the TV, shorten or directly end the life of the TV. Therefore, in summer we try to control the viewing time when watching TV. Generally speaking, it is appropriate to use 4 hours or less. When the TV is running for three or four hours, please turn off the TV. Wait until the TV is fully cooled to select normal viewing.

At the same time, it should also be noted that in the summertime, it is better not to put the TV in direct sunlight, such as a window. Long-term direct sunlight will also cause the TV appearance to be higher than normal when it is not in operation, which also hinders the cooling of the TV. Xiao Bian suggested that the TV be placed in a place that is not wet, dry, or in direct sunlight. It not only protects against moisture and heat, but also prevents excessive light from affecting the TV screen.

This is followed by heatstroke prevention for mobile phones and chargers.

When we continue to work for a period of time in the smart phones we use, the heat dissipation will be affected. The high temperature of mobile phones is an inevitable problem. Especially when summer comes, the mobile phone itself will have a relatively high external temperature in our hands. After running for some time, it will heat up to the table. Therefore, it is recommended that small friends use the mobile phone in the summer. Do not allow the mobile phone to run the program for a long time or keep the mobile phone in the hand. It is better to put the mobile phone in the bag. This will reduce part of the heat.

In addition, the mobile phone itself will generate more heat when charging, so the temperature will also become higher, in order to avoid cell phone temperature burst watch, it is recommended to minimize the use of mobile phone charging, it is best to wait until after the end of charge to continue to use, to prevent cell phone temperature Too high causes bad things, such as explosions.

After a long period of use, the charger will also have part of the electrical energy converted into heat, so the temperature will be too high, but many users are used to plug the charger on the plug board for a long time never removed, although this is very convenient to use, but not To facilitate the cooling of the charger, especially in the relatively hot environment of the summer itself, long-term charger plug in the socket will make it continue to overheat, this will not only make the charger life shorter, but also may cause some Bad things happen.

The refrigerator must also be "heatstroke-proof"

In the summer, ice watermelon, ice water, popsicles, etc. have become the first choice for people to prevent heatstroke. At this time, the function of the refrigerator is also significant. The frequency of new foods in the refrigerator is getting higher and higher, and the operating strength of the compressor is also high. As more and more, there will be more and more heat energy generated, so in the summer we will find that the outside of the refrigerator will often be very hot. Therefore, in order to help the refrigerator cool down, it is recommended that small partners not place the refrigerator in direct sunlight, and also pay attention to the back and side of the refrigerator as far as possible not directly against the wall, but to maintain a certain amount of time before the wall Distance, in order to prevent heat dissipation is not timely cause some damage to the refrigerator.



This content is copyrighted exclusively by SofaNet. Welcome manufacturers to further exchanges and cooperation with us to create more in-depth product reports.
Smart TV box recommended to install sofa butler, download address: http://app.shafa.com/
Sofa Net is an Internet technology company specializing in smart TVs and boxes. It owns popular products such as sofa butlers, sofa tables, and sofa forums. It has been committed to providing high quality application resources for smart TV and TV box users and active community exchanges. And authoritative evaluation of smart TV products.

Fast Recovery Stud Diode

Fast Recovery Diode (FRD) is a semiconductor diode with good switching characteristics and short reverse recovery time. It is mainly used in switching power supplies, PWM pulse width modulators, inverters and other electronic circuits as high-frequency rectifier diodes. Free-wheeling or damper diodes are used. The internal structure of the fast recovery diode is different from that of an ordinary PN junction diode. It belongs to a PIN junction diode, that is, a base region I is added between the P-type silicon material and the N-type silicon material to form a PIN silicon wafer. Since the base area is thin and the reverse recovery charge is small, the fast recovery diode has a short reverse recovery time, a low forward voltage drop, and a high reverse breakdown voltage (withstanding voltage).

Fast Recovery Stud Diode

Fast Recovery Stud Diode,Stud Type Fast Recovery Diode,Fast Recovery Diode,Stud Rectifier Power Diode

YANGZHOU POSITIONING TECH CO., LTD. , https://www.yzpst.com