1. 20 years - Andeli Group Co.,Ltd is founded in 1993.Â
2. 12 share holding companies - Andeli have owns 12 share holding companies in Shanghai, Hunan, Zhejiang, UAE.
3. 300 cooperating companies - We have over 300 cooperating companies.
4. 3000 workers - We have over 3000 workers.
5. USD150,000,000 - The total assets is USD150,000,000.
6. 235,000 square meters - The area of Andeli is 235,000 square meters.
7. Certification - We have passed ISO9001:2000 Quality Management System and CCC, ROHS, CE, CB, SIMKO, KEMA...
Dz47-63 is applicable to a line of AC 50Hz/60Hz, 230V in single pole, 400V in double, three, four poles for protecting overload and short circuit, and rated current up to 63A. It can also be used for infrequent line conversion under the normal condition. The breaker is applicable to lighting distribution system in industrial enterprise, commercially district, high-rise building and dwelling house. It conforms with the standards of IEC60898.
Dimension
About us
| Type | DZ47-63 | |||
| Pole | 1P | 2P, 3P, 4P | ||
| Rated current (A) | 6, 10, 16, 20, 25, 32, 40, 50, 63 | |||
| Rated voltage (V) | 230 | 400 | ||
| Ambient temperature | -5 o C~+40 o C | |||
| Type of instantaneous release | C | D | C | D |
| Rated short circuit breaking capacity Icn(kA) | 1-32A: 6 50-63A: 4 |
4 | 1-32A: 6 50-63A: 4 |
4 |
Â
| Ambient Temperature | Initial Status | Test Current | Expected Result | Expected Result | Note |
| 30±2 o C | Cold position | 1.13In | t≥1h | Non-release | - |
| Carried out immediatelyafter previous test | 1.45In | t < 1h | Release | - | |
| Cold position | 2.55In | 1s < t< 60s(In≥32A) | Release | Current smoothly rises tospecified value within 5s | |
| Cold position | 2.55In | 1s < t < 120s(In>32A) | Release | ||
| -5~+40 o C | Cold position | 3In | t≥0.1s | Non-release | Type B |
| Cold position | 5In | t < 0.1s | Release | Type B | |
| Cold position | 5In | t≥0.1s | Non-release | Type C | |
| Cold position | 10In | t < 0.1s | Release | Type C | |
| Cold position | 10In | t≥0.1s | Non-release | Type D | |
| Cold position | 20In | t < 0.1s | Release | Type D |
| Rated current(A) | Norminal cross section of wire mm 2 |
| 1-6A | 1 |
| 10A | 1.5 |
| 16,20A | 2.5 |
| 25A | 4 |
| 32A | 6 |
| 40,50A | 10 |
| 63A | 16 |
Optical Fiber Protection sleeves are used for holding and protecting fusion fiber splice point. XXR offers single fiber protection sleeve and ribbon fiber protection sleeve which could meet kinds of installation needs from our customers. We also offer special dimensions according to customized requirement.
Features
Transparent plastic tube
material:Stainless steel rod, Ceramic bar and glass bar
Prevents stress and protects fusion fiber optic splices in field and factory operations
Sleeves are made of ethylene vinyl acetate (EVA)
Sleeves have heat-activated memory which causes them to shrink under heat
Sleeves shrink tightly to exclude air and hold the rod firmly, preventing abrasion of delicate glass fibers
Applications
1. Use the enhanced wire, hot-melt tube and cross-linked polylefin composition
2. Reconstruct the fiber coating
3. Junction to provide a good mechanical strength
4. Ensure good optical transmission properties
Heat Shrink Sleeves,Heat Shrink Tubing,Heat Shrink,Shrink Tubing
Chengdu XingXingRong Communication Technology Co.,Ltd , http://www.xxrtx.net