Sony WI-1000X, while continuing to increase the active noise reduction capability of the headset, also has a sound quality that is not inferior to a thousand yuan wired in-ear headset. At the German IFA Electronics Show in early September, Sony released three 1000X series of active noise reduction Headphones, including the upgraded version of the previous generation MDR-1000X, the head-mounted WH-1000XM2, the true wireless in-ear headphones WF-1000X similar to AirPods, and the WI-1000X, which is also in-ear but with a neck-mounted design. In the next period of time, we will bring you the evaluation experience of these three active noise reduction headphones one after another. Today's protagonist is WI-1000X. The comfortable neck-hung headset WI-1000X adopts a neck-hung design. The most obvious feature of the appearance is this neckband, which is jokingly called the “dog ringâ€. The left and right earplugs are connected to the two neckbands through a wired way. side.
Compared with the recently popular'true wireless' earphones (such as AirPods, Sony WF-1000X) and wireless sports earphones (such as Jaybird X3, Beats Powerbeats3 Wireless) connected by a wire between two earplugs, WI-1000X This neck-hanging design may seem a bit'cumbersome' at first glance, but from the perspective of use and wearing, it is actually a very clever design.
Jaybird X3, wireless earphones, in addition to the earphone itself, also need to integrate many components such as battery, Bluetooth module, battery, microphone, wire control, etc. Due to the size limitation, most wireless earphones can only choose to integrate a large number of components inside the earbuds. , This may lead to problems such as heavy earbuds, poor battery life, and poor sound quality. This is why there are so many wireless headphones on the market, but there are few products that can really achieve sufficient balance in all aspects.
However, in the neck-mounted design earphone of WI-1000X, you can put the components that had to be "hard-plugged" in the earplugs into the collar, so that on the one hand, the weight of the earplugs can be very light. It makes it more comfortable to wear and easy to call up better sound. On the other hand, the relatively ample space inside the collar also leaves more room for headset manufacturers. As for the weight of the collar itself, since it is dispersed on the wearer's neck, it will basically not affect the wearing comfort.
In the process of using WI-1000X, I even tried to wear the earphones all day long (in FIIL's words it is called'wear earphones all day'), turn on the earphones when listening to music, and put the earphones directly when not in use Hang on the neck. After a few days, except that the earphones dangling during exercise is a bit annoying (WI-1000X is designed with a groove for receiving the earphone cable on the collar, but it is a little cumbersome to use), most of the time, WI-1000X is almost not Bring me extra interference. Of course, WI-1000X is not the first headset to adopt this neck-hung design. Before that, LG has launched a number of wireless headsets similar to the neck-hung design. In addition, the well-known WI-1000X is also The most direct competitor, Bose QC30, also uses a neck-hung design.
When comparing the LG HBS-910 with a neck-hung design and the Bose QC30, the neckband of the WI-1000X is slightly longer and the body is slightly heavier (71 grams for the WI-1000X and 64 grams for the QC30).
In the material of the neckband, the two are also different. The entire collar of QC30 is made of rubber, while WI-1000X uses soft imitation leather on the inside of the back of the collar (that is, the position directly in contact with the neck), and the outside is metal. This treatment is like a lot of heads. The head beam of a headset.
On the front part of the collar, WI-1000X uses leather-touch plastic. All the buttons of the headset are also concentrated on the inside of this area. On the left side, there are power-on button, volume up and down, play/pause (you can also use Come to answer the phone).
On the right is the noise reduction mode switch. Press once to switch on active noise reduction, turn off noise reduction, and ambient sound (the earphone microphone picks up the external sound and transmits it to the earphone). Long press the noise reduction optimization (the noise reduction part will explain this in detail Features).
Unlike WI-1000X, QC30 only wears a power button on the inside of the right neckband, and the volume addition and subtraction and playback control buttons are located on the right earphone line, which is closer to traditional earphone wire control. As for wearing, whether it is the Bose QC30 with shark fins or the Sony WI-1000X, they are very comfortable to wear, and there is no obvious difference between the advantages and disadvantages of the two. The best active noise reduction of similar products, none
Intelligent LV switchgear cabinet combines the intelligent power distribution monitoring terminal with the Internet of Things to realize data acquisition and intelligent connection, wherein the intelligent power distribution monitoring terminal monitors the status of power distribution equipment as well as the voltage, current, power and energy of the power distribution loop in real time, realizes the local monitoring of operating status via the HMI interface, so as to realize the local and remote comprehensive management of the LV power distribution system.
Intelligent Lv Switchgear,Low Voltage Switchgear,Low Voltage Switchgear For Distribution,Low Voltage Switchgear Panel
Jiangsu Sfere Electric Co., Ltd , https://www.elecnova-global.com