#include
#include
#include
Int main()
{
Int times;//number of games
Int mousex=0;//X-axis coordinates of the mouse
Int mousey=0;//Y-axis coordinates of the mouse
Int posx=0;//X-axis coordinates of the hammer
Int posy=0;//Y-axis coordinate of the hammer
Int hits=0;//Statistics of hitting mice
Int missed=0;//The number of statistical errors
Int i,row,col;//circular mouse effect variable
//1. Nine mouse holes and the number of times the mouse was hit
Srand(time(0));//random seed
Printf("â–¡â–¡â–¡â–¡â–¡â–¡â–¡â–¡â–¡");
Printf("Please enter the number of times the mouse is played:");
Scanf("%d",×);
//2. The effect of cycling multiple times
For(i=1;i<=times;i++)
{
//The random coordinates of the mouse
Mousex=rand()%3+1;//The random number of the mouse's X-axis coordinates from 1-3
Mousey=rand()%3+1;//The random number of the mouse's Y-axis coordinates from 1-3
/ / Determine the scope of use of the hammer
Do
{
Printf ("Please enter the coordinates of the hammer:");
Scanf("%d%d",&posx,&posy);
}while(posx<1 || posx>3 || posy<1 || posy>3);
/ / Determine whether the coordinates of the hammer and mouse are consistent
If(mousex==posx && mousey==posy)//Hit the mouse
Hits++;
Else
Missed++;
/ / Cycle print map
For(row=1;row<=3;row++)
{
For(col=1;col<=3;col++)
{
If(row==posy&&col==posx)//The coordinates of the hammer
Printf("â– ");
Else if(row==mousey&&col==mousex)//rat coordinates
Printf("☆");
Else
Printf("â–¡");
}
Printf("");
}
Printf("hit %d times, hit %d times", hits, missed);
}
Return 0;
}
Waterproof Vertical Mount D-Sub Connectors
waterproof D-sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9-, 15-, and 25-positions in standard density and 15-, 26-, and 44-positions in high density. The recommended wire gauge for the solder cup connector is 22 AWG to 26 AWG.
These panel-mount waterproof D-subs are designed for rear-mount applications in panels that are up to 2.0 mm thick. They come with two sets of jackscrews. One jackscrew set is 5 mm long for panel thickness up to 1.2 mm, and the other is 6 mm long for panel thicknesses from 1.2 mm to 2.0 mm.
Cable mount D-sub connector kits come with the backshell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the backshell, terminate the wire to the solder cup contacts, and hand tighten the cable nut on the rear of the backshell. The backshell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.
Specifications
Current rating
Standard D-sub: 5 A
Hi-density D-sub: 2 A
Breakdown voltage: ≥ AC 500 V/1 minute
Insulation resistance: ≥ 500 MΩ @ DC 500 V
Contact resistance: ≤ 20 mΩ
Material
Contacts: copper alloy, gold-plated
Connector body: nylon 9T or PBT, UL Recognized
Shell: steel, nickel-plated
Applications
DV camcorder
DV VTR
Non-linear editing system
Broadcast monitor
Betacam deck
Panel Mount Waterproof D-Sub Connectors:
Water Proof D-Sub, Standard Density, Male, Panel Mount
Water Proof D-Sub, Standard Density, Female, Panel Mount
Water Proof D-Sub, Standard Density, Female, PCB Mount
Waterproof solder cup, stamped & formed contact D-sub waterproof
solder cup,machined contacts D-sub waterproof
Vertical Mount Waterproof D-Sub Connectors:
Combo Power + Signal D-Sub Connector, Vertical Mount, Pluge Type,
right angle D-sub waterproof
IP67 rated Combo power D-sub waterproof
Standard Density, Waterproof Vertical Mount D-Sub Connectors, High Density Waterproof Vertical Mount D-Sub Connectors,IP67 D-Sub Connectors Vertical Mount,Board Mount Waterproof Vertical Mount D-Sub Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com