1, affecting the appearance
This is the most basic hazard, and gold is also afraid of dust.
Long-term non-cleaning, due to the aging of metal parts, there are certain safety hazards.
If you don't clean for a long time, the light of the lighting will be darker. If you are in dim light, it will cause people's mental state to be poor. According to the survey, if the dust is not cleaned up within one year, the brightness of the light will be reduced by 30%.
If the lamp is not cleaned for a long time, the surface of the lamp will be dusty, and the heat dissipation and the luminous effect will be greatly reduced, so that the life of the lamp is reduced.
Cleaning techniques for all types of lamps <br> First of all, the principle of lamp cleaning can not be removed, try not to remove! Because you may not be able to find out more parts after cleaning.
1. Ceiling light & chandelier
2, floor lamp
3, table lamp
4, spotlights
Cleaning techniques for all types of lampshades <br> Many families will choose to put a lampshade on the lamp to prevent moisture and dust. Different lampshades also have corresponding cleaning methods.
Plastic and metal lampshade cleaning:
(1) Use a wrung rag to add a universal cleaner to wipe the dirt.
(2) Wipe off the remaining detergent ingredients with a wrung rag.
(3) Finally, use a clean, clean rag and carefully wipe it again.
(1) Gently dust the dust with a soft cloth such as flannel.
(2) After that, use a clean, clean rag and carefully wipe it again.
(1) First remove the dust with anti-static tweezers.
(2) After that, wipe the dirt with a dry rag.
(3) The subtle part of the crafts, using small things such as a brush to remove dirt that is not easily removed.
In this type of lampshade that is easy to generate static electricity, here is a small trick: pour the vinegar of about one beer bottle cap into half a basin of water and mix thoroughly, soak the rag in it, wring it out and wipe the lamp. In this way, the lamps that are wiped out are not only bright, but also do not generate static electricity and are not easily stained with dust.
Leave a trace of the fingerprint on the light switch, and use a rubber eraser to clean it.
If the socket is contaminated with dirt, unplug it and wipe it with a soft cloth dampened with a small amount of detergent.
When cleaning a wrinkled fabric shade, use a soft-toothed toothbrush as a tool to prevent damage to the shade.
Clean the lamp cover made of acryl, apply detergent, wash off the detergent with water, and then dry. Ordinary bulbs can be wiped with salt water.
1. After buying the lamp, don't be busy with the installation. Read the installation instructions carefully, and follow the installation instructions according to the installation. Otherwise, danger may occur.
2. Do not change the structure of the lamp during cleaning and maintenance, and do not change the parts of the lamp at will. After maintenance, the lamp should be installed as it is, and the parts of the lamp should not be missed or misplaced;
3. When using the luminaire, try not to switch frequently. Although the resistance of the LED lamp is about 18 times that of the ordinary fluorescent lamp, it will affect the life of the electronic components inside the LED lamp too much, which will affect the life of the lamp.
4. It is important to note that in addition to special LED lamps, ordinary LED lamps should be avoided in wet environments. The humid environment will affect the electronic components of the LED lamp driving power supply. The electronic components are damp and the lamp life is shortened.
Therefore, moisture protection is the key to lighting maintenance. Especially for bathroom and bathroom LED lights and kitchen stove lights, moisture-proof lampshades should be installed to prevent moisture intrusion and avoid rust damage or leakage short circuit.
5. Finally, it is best not to clean the LED light with water. Just wipe it with a dry cloth and wipe it with water. If it is accidentally touched, try to dry it as much as possible. Do not wipe it with a damp cloth immediately after turning on the light.
Precautions
1. Ordinary LED lights cannot be used in the circuits of dimming table lamps, delay switches, and inductive switches.
2. Avoid use in high temperature and high humidity environment.
3, LED lamps are mainly power supply inside, it is recommended that non-professionals do not load and unload the assembly, so as to avoid the risk of electric shock.
4. LED lighting fixtures are generally used when the ambient temperature is 5 to 40 °C.
5, the metal part of the LED lighting can not be free to use chemicals such as polishing powder.
6. The dust behind the LED lighting fixture should be cleaned with a dry cloth or tweezers.
7, avoid frequent switching, so as not to impose an additional burden on the luminaire.
Many people in the family often ignore the maintenance process in the daily use of lamps, many people use the lamp is to buy - install - use - damage - discard. But as long as you pay attention to routine routine cleaning and normal use, in fact, many lamps can also be used in our hands. In other words, you may have already smashed a lot of "lights" on your hands.
The texture of Regular Back Sticker attracts you in a unique and innovative way. The ultra-thin and breathable material does not affect the heat dissipation function of the device at all. The smooth feel and personalized patterns not only protect the phone from scratches, dust, impacts and fingerprints. Bring you a different experience.
The Back Film protects the back cover of the phone from unnecessary scratches and repels dust, while reducing the signs of daily wear and tear.
It has oleophobic and waterproof effects, which can prevent the adhesion of oil stains and fingerprints. Provide comprehensive protection and maintain a new state.
Using the Protective Film Cutting Machine, you can install the Back Film on different types of mobile phone back shells, including mobile phones, tablets and other electronic products. With just one click, the customization can be completed in 30 seconds.
If you want to know more about Regular Back Sticker products, please click the product details to view the parameters, models, pictures, prices and other information about Regular Back Sticker products.
Whether you are a group or an individual, we will try our best to provide you with accurate and comprehensive information about Regular Back Sticke!
Leather Back Sticker, Aurora Back Sticker, Back Skin Sticker, Brushed Metal Back Sticker, Mobile Phone Sticker, Back Sticker,Mobile Skin Sticker
Shenzhen Jianjiantong Technology Co., Ltd. , https://www.jjtbackskin.com