In the past, we must not mention that today, once again on the seventh night of the Chinese New Year, no matter how many memories you have, no matter how you dodge, you will be filled with sweetness everywhere.
Angrily do not understand why there is so much Valentine's Day in a year. From the Western Valentine's Day on February 14th to the Chinese traditional Valentine's Day Valentine's Day, there is something like White Valentine's Day, 520 and so on. The single dog is always suffering from tons of damage.
On this special day, in order to heal the wounds in my heart, I can only play a game with one machine to vent my inner grief.
I am not humble enough to say that I am a sultry person. Therefore, I must install the machine to show that light pollution is the theme.
Before going to the hardware, according to the usual practice, let's take a picture of the family. Take a 45° image from the upper corner.
Sapphire RX 480 ultra-platinum 8G, spy photos at the time like a gas stove, that look more LOW how much LOW, but really feel after the appearance is still very good, plus this backplane, so it is.
This brand new logo lamp is said to be customizable in colors, but customer service says that the software has not yet come out and is drunk. Come out and hurry up and come out quickly. The important thing is to say it three times.
This is the legendary comes with a button to accelerate, I tried to boot, and after the acceleration is 1342MHz, a lot larger than the public version.
Compared with the public version of the interface, coupled with the DVI interface, this fly.
By the way, there is nothing to dismantle the cooling fan, there is only one screw, directly connected with the contacts, this is the real convenience to remove it.
Installed DDR4 memory is now the price of cabbage, and naturally not tangled is not to be on the old platform, direct 6 generations Core Duo, I5 6500, salted fish to start, although there are traces of use, but no problem.
Motherboard Biostar B150GT5, nothing else, mainly cheap, this price is still 6-phase power supply.
Others do not seem to have any highlights, in addition to the power supply cooling module comes with light mode, not much to say, look directly at the map.
Two pirate ships Avengers memory, composed of 16G, basically playing games, video editing is enough.
A 120G ssd, a 1T mechanical hard disk, temporarily enough.
After all, the side through the chassis, round the power cord is more ugly, so chose this Great Wall ultimate fire G550, flat line.
Of course, a full module is also a must.
The installation process, after all, is not a tutorial, so choosing a few from it is enough, yes, the chassis is Xingu LUX Lax goddess chassis.
Light pollution is the subject of installation.
The LOGO light of the video card is close-up, if you can customize it into blue, there will be no conflict in the entire hue. Unfortunately, it cannot be adjusted for the time being.
A cursory test, the graphics card factory is a key acceleration mode, the test is run at 1342MHz frequency.
3 chassis fan cooling effect is good, it is a bit noisy, than the video card and CPU cooling fan is also super. The heat dissipation of the video card itself is also good, and the temperature of the video card is 75°.
Or come play games, vent emotions or more suitable for playing these two games.
There is also a shaman 3, but you can't go down anymore. It's not a child to go down.
Silently delete WeChat, completely cut off the circle of friends, and it is not seen as a net.
The pigtail refers to an optical fiber or optical cable with an optical fiber connector installed at one end and an optical fiber or optical cable at the other end. Divide an optical jumper into two to become two optical pigtails. Optical pigtails are usually used for the end of the optical path (such as the actual test result box of the terminal point pair, the splice tray in the wiring equipment, etc.). Or the extraction of optical devices (such as optical splitters, lasers, detectors, etc.). The pigtail length is usually no more than 2 meters.
Same as the optical jumper, when the connecting wire is an optical cable (mostly indoor optical cable), it is called an optical fiber pigtail, and when the connecting wire is an optical fiber (usually a tight-buffered optical fiber), it is called an optical fiber pigtail. There is no special product standard for optical pigtails. Most buyers and sellers switch to "arbitrary type" in the form of optical patch cords when they deliver. The quality acceptance is the same as optical patch cords, which also apply optical fiber movable connector standards.
Pigtails are divided into multi-mode pigtails and single-mode pigtails. The multimode pigtail is orange, the wavelength is 850nm, the transmission distance is 5Km, and it is used for short-distance interconnection. The single-mode pigtail is yellow, with two wavelengths, 1310nm and 1550nm, and transmission distances of 10km and 40km, respectively.
Fiber is an important component of the optical communication system, which is mainly used to realize the two functions of the interconnection of the optical ports between the devices and the interconnection of the device and the fiber core of the optical cable. Different from conventional cables, the pigtail core wire has the characteristics of easy breakage and weak tensile performance, and there is no mature on-site processing plan for the interface components, and it is impossible to make a pigtail with a suitable length on site according to the actual distance. Therefore, in practical applications, the pigtails are usually factory-processed and manufactured according to a certain nominal length series. When installing and constructing on site, engineers can choose pigtails that are longer than the actual distance. Because pigtails have the characteristics of discretization and easy damage, pigtail reeling is the core link in the installation, return and storage of pigtails.
The inner core of the pigtail uses silica glass filaments to carry the optical path. The body is fragile and easy to break. The main line is usually a 48-core ADSS optical cable. These pigtails need to be sheathed in a corrugated tube and placed in the floor compartment or cable sandwich. There is no effective tool assistance in the traditional pigtail threading method, and the operation and maintenance personnel adopt the traditional brute force method to pass the pigtail through the corrugated tube, which causes more fiber jumper damage and high probability of service interruption.
Different Connector Pigtail, Connecter Color-coded Pigtail, Connecter Bunch Pigtail, FC Waterproof Pigtail, Ribbon Fanout Pigtail
Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com